I really want to refinish this window trim but am at a loss in protecting and preventing it from happening again.
I was thinking of sanding back down, re-staining then adding coats (7 or 8) of varathane. After that, I was going to buy a piece of plexi-glass and tapping the plex-glass into place with a couple small screws. My fear is that the trim wouldn't be able to breath underneath the plexi-glass and all the refinishing would melt to the glass.
Oh and how did this trim get into such a dire need of repair......
.
.
.
.
.
.
.
.
.
.
.
Would welcome any suggestions!