Pet forum for dogs cats and humans - Pets.ca

Pet forum for dogs cats and humans - Pets.ca (http://www.pets.ca/forum/index.php)
-   Feeding raw food to dogs & cats - B.A.R.F - RMB - Homecooked diet (http://www.pets.ca/forum/forumdisplay.php?f=64)
-   -   Using a Manual Grinder? (http://www.pets.ca/forum/showthread.php?t=60536)

TheHans February 5th, 2009 07:19 PM

Using a Manual Grinder?
 
Hi,

I really can't find this addressed anywhere -- does anyone know if it's possible (or have experience with) grinding raw chicken bones and all using one of those manual turn-crank grinders? Chicken bones aren't as tough as beef bones or even turkey. So I'm thinking it's possible to use a manual grinder for chicken. Any comments would be appreciated.

The Hans

luckypenny February 5th, 2009 07:24 PM

If the chicken's cut up into smaller pieces, the blades are sharp, and you've got a strong arm, I don't see why it wouldn't work.

Is there a reason why you don't feed whole pieces to your pets?

angeldogs February 5th, 2009 07:26 PM

It's not fun at all and can be very time consuming.i just stopped after a few times.if i ever switch back to raw i want to get an electric one that will grind bones.the one i was using was a small one.
Depending on where you live.i was at princess auto and they have a real big one there that might grind the bone with little effort.

TheHans February 6th, 2009 01:12 PM

Thanks for your replies. We want to grind the chicken ourselves for a complete raw food. We've been buying prepared raw food, but it's just getting way too expensive to do it this way. We can't find anyone in our vicinity who will grind chicken (like a butcher). So we have to do it ourselves. It sounds like we'll need an electric grinder, though I'm surprised as I thought a manual grinder would do the trick for chicken bones specifically. But I think I'm mistaken.

The Hans

TheHans February 6th, 2009 02:08 PM

[QUOTE=angeldogs;743720]It's not fun at all and can be very time consuming.i just stopped after a few times.if i ever switch back to raw i want to get an electric one that will grind bones.the one i was using was a small one.
Depending on where you live.i was at princess auto and they have a real big one there that might grind the bone with little effort.[/QUOTE]

Was it chicken you were grinding? It sounds like you were able to do it, but it was hard. Though not impossible perhaps? :-) Do you think you could give a bit more detail?

The Hans

bendyfoot February 6th, 2009 02:12 PM

Is there any reason why you can't just give whole meat/bone peices to your pet?

pitgrrl February 6th, 2009 02:20 PM

[QUOTE=luckypenny;743719]If the chicken's cut up into smaller pieces, the blades are sharp, and you've got a strong arm, I don't see why it wouldn't work.[/QUOTE]

Oh, I can tell you why not. :laughing:

Chicken is far more moist or squishy than, say, beef. It tends to sort of disintegrate into a disgusting paste that gets stuck in the grinder and won't forward properly, leaving you to try to push it along, clean it out and generally get raw chicken pate all over the place. Or at least that was my experience with a couple of different grinders which worked perfectly well on firmer/drier meats........:shrug:

TheHans February 6th, 2009 02:30 PM

[QUOTE=bendyfoot;744081]Is there any reason why you can't just give whole meat/bone peices to your pet?[/QUOTE]


I can give pieces, but it's not a complete food. We want to make a complete raw food for our cats. We're currently buying prepared raw food, but it's getting way too expensive.

The Hans

TheHans February 6th, 2009 02:31 PM

[QUOTE=pitgrrl;744086]Oh, I can tell you why not. :laughing:

Chicken is far more moist or squishy than, say, beef. It tends to sort of disintegrate into a disgusting paste that gets stuck in the grinder and won't forward properly, leaving you to try to push it along, clean it out and generally get raw chicken pate all over the place. Or at least that was my experience with a couple of different grinders which worked perfectly well on firmer/drier meats........:shrug:[/QUOTE]

I didn't think about that. Yuck on the disgusting paste. It's so weird though. As electric grinders are so expensive. We're kind of in the middle of nowhere in B.C., so our choices are a bit limited. If anyone knows of an electric grinder that would do the trick specifically on chicken and bones for $100 or less, I'd appreciate the link.

The Hans

bendyfoot February 6th, 2009 02:32 PM

Still don't quite understand...complete food would just mean providing the right portions of meat, bone and organ (75-80%, 10%, 15%) over the course of a week... our dogs and cats are eating raw and we never grind their food. I think you're making a lot more work for yourself than you really need to. :shrug:

TheHans February 6th, 2009 02:40 PM

[QUOTE=bendyfoot;744099]Still don't quite understand...complete food would just mean providing the right portions of meat, bone and organ (75-80%, 10%, 15%) over the course of a week... our dogs and cats are eating raw and we never grind their food. I think you're making a lot more work for yourself than you really need to. :shrug:[/QUOTE]


You might be right. But our cats are currently on a prepared, ground meal and they love it. And are used to it. We just prefer to go this way.

The Hans

angeldogs February 6th, 2009 02:42 PM

[QUOTE=TheHans;744079]Was it chicken you were grinding? It sounds like you were able to do it, but it was hard. Though not impossible perhaps? :-) Do you think you could give a bit more detail?

The Hans[/QUOTE]

The thicker bones like the leg are really tough to gind.i only started to grind because my dog stopped digesting bone.so i tried to hand grid the chicken and the legs and joints took an hour or so for 1 meal to grind up and the meat just packs up in the grinder.if your going to grind i would just buy the carcess and grind the small bones and just feed the meat with out grinding.chicken bones are soft enough in a raw form for them to chew themselves plus it helps keep the teeth and gums clean.with you won't get from grinding.

bendyfoot February 6th, 2009 02:44 PM

[QUOTE=TheHans;744108]You might be right. But our cats are currently on a prepared, ground meal and they love it. And are used to it. We just prefer to go this way.

The Hans[/QUOTE]


Fair enough, whatever works for you guys. (I'm pretty lazy so throwing down peices of meat/bone/offal works well for us). Keep in mind, though, than many of the dental benefits are lost through grinding. ANYhoo. Have you considered asking your butcher to do the grinding for you? You could just grind the meat, and add bone meal instead of grinding the bone.

pitgrrl February 6th, 2009 02:45 PM

For what it's worth, [URL="http://www2.northerntool.com/food-processing/grinders/item-168632.htm"]this[/URL] seems to be the popular choice amongst raw feeders who grind. Expensive for sure, but maybe you could find one on ebay or craigslist or the like?

[URL="http://www.amazon.ca/Pitcairns-Complete-Guide-Natural-Health/dp/157954973X/ref=pd_bbs_sr_1?ie=UTF8&s=books&qid=1233949583&sr=8-1"]Dr. Pitcairn's New Complete Guide to Natural Health For Dogs and Cats[/URL] goes into detail about various options regarding calcium supplementation if you can't continue to feed bone.

TheHans February 6th, 2009 02:50 PM

[QUOTE=bendyfoot;744113]Fair enough, whatever works for you guys. (I'm pretty lazy so throwing down peices of meat/bone/offal works well for us). Keep in mind, though, than many of the dental benefits are lost through grinding. ANYhoo. Have you considered asking your butcher to do the grinding for you? You could just grind the meat, and add bone meal instead of grinding the bone.[/QUOTE]

We wish we could find a butcher to do it. No one will. At Safeway, they don't even grind chicken, just beef. They say it's completely against company policy due to cross-contamination. We're vegetarians and don't eat chicken ourselves. So all this talk about cross-contamination isn't that great to hear.

The Hans

TheHans February 6th, 2009 02:51 PM

[QUOTE=pitgrrl;744115]For what it's worth, [URL="http://www2.northerntool.com/food-processing/grinders/item-168632.htm"]this[/URL] seems to be the popular choice amongst raw feeders who grind. Expensive for sure, but maybe you could find one on ebay or craigslist or the like?[/QUOTE]

I think that's way more than we should have to spend, considering we'll never do anything tougher than turkey bones and probably not even that. One of our cats has a very sensitive stomach, so chicken or turkey is really the best for him.

The Hans

angeldogs February 6th, 2009 02:52 PM

That would be the way to go if your going to gind.be much faster and you could easily make up a big batch and freeze it.then pull out and thaw what you would need for the week or a few days at a time.

pitgrrl February 6th, 2009 02:55 PM

[QUOTE=TheHans;744117]I think that's way more than we should have to spend, considering we'll never do anything tougher than turkey bones and probably not even that. One of our cats has a very sensitive stomach, so chicken or turkey is really the best for him.

The Hans[/QUOTE]

No doubt, I wouldn't personally buy it, but a hand grinder is a nightmare with chicken and this seems to be one of the few grinders that can deal with bone, or so one would believe after reading many reviews by raw feeders :shrug:

sugarcatmom February 6th, 2009 03:16 PM

This Northern Tool grinder is fine for handling chicken: [url]http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_36989_36989[/url]

It's the same as this Tasin one, which is very popular with the feline raw food people: [url]http://www.onestopjerkyshop.com/product_info.php?products_id=47[/url]

You might be able to find one on eBay for cheaper, although shipping costs could be an issue.

TheHans February 6th, 2009 04:03 PM

Does anyone have experience using this Waring one for chicken bones?

[url]http://www.sears.ca/gp/product/B000FJYYTE?searsBrand=core[/url]

I know it's not heavy-duty, but we're talking chicken bones, not beef bones.

The Hans

sugarcatmom February 6th, 2009 05:29 PM

[QUOTE=TheHans;744142]Does anyone have experience using this Waring one for chicken bones?

[url]http://www.sears.ca/gp/product/B000FJYYTE?searsBrand=core[/url]

I know it's not heavy-duty, but we're talking chicken bones, not beef bones.

The Hans[/QUOTE]

I don't know anyone who has used it, but looking at the specs, the motor is only 300 watts. By comparison the Tasin and Nothern Tools grinders are 1200 and 1000 watts, respectively. Make sure to read the fine print if you do get a grinder because many of the lower-end ones specify that the warranty is void if you run bones through it.

Stacer February 6th, 2009 10:13 PM

I too will attest to the torture of putting chicken through a manual grinder. Not worth it IMO. When I did do it though, I would make a huge batch and freeze it in small meal size portions using little 1/2 cup mason jars.

luckypenny February 6th, 2009 11:43 PM

I'd recommend checking out restaurant and butcher equipment outlets. Expensive but they often have second hand grinders that are quite affordable.

I have to tell you though, we have a table top industrial grinder at work and it starts to overheat after only 7-8 minutes of grinding bones. I can go an extra 5 minutes or so before letting it cool down if I alternate chicken necks with meat. We have another giant floor model one that does bones easily (but you'll have to remortgage your home for one :D) and even with that one, I have to sharpen the blades after grinding.


All times are GMT -5. The time now is 11:48 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.